We turned on the camera as we assembled this AR15 upper; Barrel, Front Sight, Gas Tube, Barrel Nut and Upper Receiver

www.ar15buyersguide.com /> .. full details & larger pic

33 visits

A very quick test to show side blast from this short barreled AR15

This test was not all that dramatic, but this AR15 SBR was really obnoxious that morning (shooters even moved to other benches at the range because it was so loud & annoying)
I held up a paper target to try to help show how much of the muzzle blast was directed to the left & right side of the barrel (where we were standing)

www.ar15buyersguide.com
.. full details & larger pic

51 visits

Collecting input from military, law enforcement, and civilian shooters, we have designed a magazine that can be depended on during a trip to the firing range or deployment overseas. Weapons are only as good as the feeding device used with them and you can count on our magazine to reliably function in any operational environment. Aggressive horizontal ridges provide increased gripping surface for insertion and extraction of the magazine in wet or muddy conditions. Molded of reinforced composite, our magazine has a 30 round capacity. It is made in the U.S.A. and is backed by our lifetime warranty. Fits the AR15, M4, and M16.

magazinebuyersguide.net
.. full details & larger pic

36 visits

We look at a Hard Plate Body Armor vest and a chest rig set up to work the same way. We look at the gear installed and how this set up holds up and runs.

bodyarmorbuyersguide.com .. full details & larger pic

99 visits

We attached a Redi-Mag (MKI QA) and a Phase 5 Tactical Extended Bolt Release on this AR15 carbine to test how they work together

www.ar15buyersguide.com
.. full details & larger pic

57 visits

We had a chance to photograph this LaRue Tactical AR15 at the 2009 NRA Annual Meetings & Exhibits in Phoenix, Arizona. LaRue Tactical AR15 uses the LaRue LT-15 AR15 lower receiver which is CNC-Machined from 7075 Aluminum. The LaRue Tactical design is reinforced in critical areas or the AR15 receiver. The LaRue LT-15 has a flared magwell, enhanched trigger guard for operation with gloves, a reinforced buffer tube area, Type-3 hard coat anodized in deep-black and is subject to stringent quality control processes including test-fitting to their Stealth uppers to insure fit, function and a color match. LaRue Tactical AR15 uses many high quality LaRue Tactical parts including; a CNC-machined Stealth Billet Upper (LT-007), LT Free-float Handgaurd, Barrel, Low-Profile Gasblock and Tube, Mil-Contract M16 Bolt Carrier Group and Charging Handle.

ar15buyersguide.com
.. full details & larger pic

319 visits

We had a chance to photograph this LaRue Tactical AR15 at the 2009 NRA Annual Meetings & Exhibits in Phoenix, Arizona. LaRue Tactical AR15 uses the LaRue LT-15 AR15 lower receiver which is CNC-Machined from 7075 Aluminum. The LaRue Tactical design is reinforced in critical areas or the AR15 receiver. The LaRue LT-15 has a flared magwell, enhanched trigger guard for operation with gloves, a reinforced buffer tube area, Type-3 hard coat anodized in deep-black and is subject to stringent quality control processes including test-fitting to their Stealth uppers to insure fit, function and a color match. LaRue Tactical AR15 uses many high quality LaRue Tactical parts including; a CNC-machined Stealth Billet Upper (LT-007), LT Free-float Handgaurd, Barrel, Low-Profile Gasblock and Tube, Mil-Contract M16 Bolt Carrier Group and Charging Handle.

ar15buyersguide.com
.. full details & larger pic

188 visits

We had a chance to photograph this LaRue Tactical AR15 at the 2009 NRA Annual Meetings & Exhibits in Phoenix, Arizona. LaRue Tactical AR15 uses the LaRue LT-15 AR15 lower receiver which is CNC-Machined from 7075 Aluminum. The LaRue Tactical design is reinforced in critical areas or the AR15 receiver. The LaRue LT-15 has a flared magwell, enhanched trigger guard for operation with gloves, a reinforced buffer tube area, Type-3 hard coat anodized in deep-black and is subject to stringent quality control processes including test-fitting to their Stealth uppers to insure fit, function and a color match. LaRue Tactical AR15 uses many high quality LaRue Tactical parts including; a CNC-machined Stealth Billet Upper (LT-007), LT Free-float Handgaurd, Barrel, Low-Profile Gasblock and Tube, Mil-Contract M16 Bolt Carrier Group and Charging Handle.

ar15buyersguide.com
.. full details & larger pic

163 visits

We had the chance to photograph the new Blade-Tech AR15 Rifle Training Bolt at the 2009 NRA National Meeting in Phoenix, Arizona. I am a fan of the Blade-Tech products and this is another useful item in my opinion. When I first saw the new Blade-Tech barrel being demonstrated on this Smith & Wesson M&P15 I was impressed with the design which allowed for easy storage in the pocket of a range bag, unlike the 16 inch long plastic training barrel inserts we now use. This training aid / safety device replaces the bolt in the AR15 / M-16 with the bright yellow plastic training bolt. A length of shock cord (elastic cord) threads down the barrel and can tie off with the yellow safety flag that sits at the flash hider to indicate the rifle is non-operable. The Blade-Tech AR15 Rifle Training Bolt will allow full function of the AR15 bolt carrier, which aids in trigger function for reset drills. A big advantage of a training barrel over the solid plastic training rifles is usefulness, cost and size. While the larger solid plastic training guns cost many times more than this Blade-Tech AR15 Rifle Training Bolt, they are also the same size as a rifle so they can be difficult to store and transport. A non-firing training rifle ideal for disarming, weapon retention, room clearing and CQB tactics. Use your own AR15, Use your own sights or optics, use your own forward grip, stock and pistol grip.. even your own charging handle and magazines

ar15buyersguide.com
.. full details & larger pic

64 visits

We had the chance to photograph the new Blade-Tech AR15 Rifle Training Bolt at the 2009 NRA National Meeting in Phoenix, Arizona. I am a fan of the Blade-Tech products and this is another useful item in my opinion. When I first saw the new Blade-Tech barrel being demonstrated on this Smith & Wesson M&P15 I was impressed with the design which allowed for easy storage in the pocket of a range bag, unlike the 16 inch long plastic training barrel inserts we now use. This training aid / safety device replaces the bolt in the AR15 / M-16 with the bright yellow plastic training bolt. A length of shock cord (elastic cord) threads down the barrel and can tie off with the yellow safety flag that sits at the flash hider to indicate the rifle is non-operable. The Blade-Tech AR15 Rifle Training Bolt will allow full function of the AR15 bolt carrier, which aids in trigger function for reset drills. A big advantage of a training barrel over the solid plastic training rifles is usefulness, cost and size. While the larger solid plastic training guns cost many times more than this Blade-Tech AR15 Rifle Training Bolt, they are also the same size as a rifle so they can be difficult to store and transport. A non-firing training rifle ideal for disarming, weapon retention, room clearing and CQB tactics. Use your own AR15, Use your own sights or optics, use your own forward grip, stock and pistol grip.. even your own charging handle and magazines

ar15buyersguide.com
.. full details & larger pic

59 visits

We had the chance to photograph the new Blade-Tech AR15 Rifle Training Bolt at the 2009 NRA National Meeting in Phoenix, Arizona. I am a fan of the Blade-Tech products and this is another useful item in my opinion. When I first saw the new Blade-Tech barrel being demonstrated on this Smith & Wesson M&P15 I was impressed with the design which allowed for easy storage in the pocket of a range bag, unlike the 16 inch long plastic training barrel inserts we now use. This training aid / safety device replaces the bolt in the AR15 / M-16 with the bright yellow plastic training bolt. A length of shock cord (elastic cord) threads down the barrel and can tie off with the yellow safety flag that sits at the flash hider to indicate the rifle is non-operable. The Blade-Tech AR15 Rifle Training Bolt will allow full function of the AR15 bolt carrier, which aids in trigger function for reset drills. A big advantage of a training barrel over the solid plastic training rifles is usefulness, cost and size. While the larger solid plastic training guns cost many times more than this Blade-Tech AR15 Rifle Training Bolt, they are also the same size as a rifle so they can be difficult to store and transport. A non-firing training rifle ideal for disarming, weapon retention, room clearing and CQB tactics. Use your own AR15, Use your own sights or optics, use your own forward grip, stock and pistol grip.. even your own charging handle and magazines

ar15buyersguide.com
.. full details & larger pic

48 visits

Magpul PMAG and Tango Down ARC AR15 Magazine side by side to see some of the difference between the two magazines

magazinebuyersguide.net
.. full details & larger pic

47 visits

Magpul PMAG and Tango Down ARC AR15 Magazine side by side to see some of the difference between the two magazines

magazinebuyersguide.net
.. full details & larger pic

46 visits